Jump to content
Sign in to follow this  
TJM

Spares

Recommended Posts

Hello
I have the following bits for sale:
AP Racing Brake Kit (For 15" Wheels) consisting on CP5040 Pro 5000+ calipers, AP Racing 304x28mm Discs, DS2500 Brake Pads, Brake Bells And Brackets, AP Racing Bell To Disc Mounting Bolts, Caliper Mounting Bolts, Shim Washer. £1250.00. SOLD
ap-kit.jpg
SBD 7 Degree Bellhousing - Only Ever Been Used For Dry Building - Vauxhall 8V/16V Redtop Etc To Ford Gearboxes Type 9 etc With Bolts £135.00.
bell.jpg
SBD 7 Degree Inlet Manifold With Water Tube - Only Ever Been Used For Dry Building - Vauxhall Redtop 2.0 16V - Studs And Carb Seals Included (Some O Rings Are Missing) £100.00
inlm.jpg
Chevette/Kadett C/Manta B/Cavalier Mk1 Lower Wishbone Bushes - Fitted To A Wishbone Then Removed To Be Replaced By Poly Bushes - Never Been Put Onto A Car £25.00 a Pair.
bush.jpg
Chevette Inder Lens - Secondhand £5.00 SOLD
ind-lens.jpg
Chevette Indicator Lenses NOS £25.00 A Pair. SOLD
ind-lenses.jpg
Chevette Indicators - Secondhand £20.00 A Pair SOLD
ind1.jpg
Chevette Indicators - Secondhand £20.00 A Pair SOLD
ind2.jpg
Jenve 45 Throttle Bodies - Secondhand £250.00 A Pair SOLD
jenvey.jpg
Quaife NOS Ford Type 9 Gear Lever With Nylon Gearknob - Some Slight Surface Rust And Finger Marks On Gearknob - Only Ever Used Ford Dry Builds - £70.00 SOLD
quaife-lever.jpg
Chevette/Kadett C/Manta B/Cavalier Mk1 RoseJointed Rear Axle Links - Standard Converted By MW Motorsport - Rear Bush Housing Strapped For Strength - Needs Rear Bushes (Not Supplied) £50.00 A Pair.
rlinks.jpg
Postage Extra at cost.
I can accept PayPal at no extra charge. More to come soon included new Progressive Chevette HD Front Springs.
Regards
Tim
Edited by TJM
Changed the image links into images

Share this post


Link to post
Share on other sites

How much to post the Bell housing XE to type 9 please.

Also, does it take a standard type 9 release arm. THanks

Edited by Sutty2006

Share this post


Link to post
Share on other sites

£10.99 to UK Mainland for everything except the Brake Kit which would be nearer £20 with insurance.

Regards

Tim

Share this post


Link to post
Share on other sites

Cheers. Does the bell housing take a standard type 9 release arm?

Share this post


Link to post
Share on other sites

cant see a description bud. Just a picture.

Share this post


Link to post
Share on other sites

Sorry, have now put the link in. It gives a small description but basically saying Ford made so many variations it is difficult to identify which ones will or will not fit. Theirs does but as I say it does look like a RS2000 lever.

Regards

Tim

Share this post


Link to post
Share on other sites

These ones are replacement for weber dcoe or dellorto dhla carburettors. They convert to fuel injection, are programmable with the correct ecu etc, more efficient, more reliable than carburettors.

Regards

Tim

Share this post


Link to post
Share on other sites

More items sold, please see amended list above.

Regards

Tim

Share this post


Link to post
Share on other sites

Hi there do you have any of the second hand Chevette indicator units still available.

thanks in anticipation 

Share this post


Link to post
Share on other sites

All sold now.

Regards Tim

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×