Jump to content
Sign in to follow this  
huw

400 Fibre Glass Vents

Recommended Posts

Hi. got some manta 400 fibre glass bonnet vents and diamond vent. Any body know the dimensions for where they should be set in place on the bonnet.

Dont know weather to rivet them on some how or some kind of glue. any ideas would be good . thank you

Share this post


Link to post
Share on other sites

are you fitting them to a plain fibreglass bonnet, or a standard metal one?

Share this post


Link to post
Share on other sites

standard metal one. just unsure of the measurements of where they go on the bonnet

Share this post


Link to post
Share on other sites

ah ok.... if no-one on here has the measurements (I expect several do, though whether they will give them out to a non club member is another matter ;)) then I can probably measure the vents on mine when I get back after the weekend.

The reason I asked was because I have a 400 bonnet but I'm tempted to swap it for a plain fibreglass one (if such items exist) - and I am potentially driving past gwent tomorrow night.

Good luck

Jason

Share this post


Link to post
Share on other sites

metal sorry. that would be a great help if you could measure up yours. thank you. theres no rush on it. ive been working it for about 4 years lol

Share this post


Link to post
Share on other sites

metal sorry. that would be a great help if you could measure up yours. thank you. theres no rush on it. ive been working it for about 4 years lol

If you open your original metal hood and look underneath you can actually see where they are supposed to go as the frame has holes at those locations :)

The diamond one is to let heat from the radiator out of the engine bay, and the two sidewents are for intake and the other is to cool down the exhaust (16V 400 engine) :)

Edited by monzta

Share this post


Link to post
Share on other sites

I have to disagree! The two raises ar to allow clearance for the long travel suspension turrets!

th_015-6.jpg

  • Like 1

Share this post


Link to post
Share on other sites

The holes underneath the bonnet sounds promissing. Thanks for that info. Ill have a look on the weekend.

Ill also find some 400 pics and try scale it up. Its only for looks anyway so doesnt really matter if its wrong.

Share this post


Link to post
Share on other sites

I have to disagree! The two raises ar to allow clearance for the long travel suspension turrets!

th_015-6.jpg

I have to disagree as well :) Those turrets are not original i400 parts, and that was not the reason they were made.

8,%20Cut%20away%201982%20400.jpg

Share this post


Link to post
Share on other sites

Thats an artists drawing to show some of the differences between the road and rally homologation. You need to check the FISA homologation papers.

Nice try though!

Share this post


Link to post
Share on other sites

Thats an artists drawing to show some of the differences between the road and rally homologation. You need to check the FISA homologation papers.

Nice try though!

OMG

motor%20manta%20400.jpg

The following pic is from an article in a car magazine making a review of the car in 1981

motorraum.jpg

JamesPictures017.jpg

opel-manta-400-motor-opel.preview.jpg

Do you need more pics of original i400 that has got normal Manta shocks ?

Look, homologation papers tell you what is generally allowed on a specific car, as well as descriping the original car in detail. The i400 did never roll out of the factory looking like that, but it is possible it is a mod that has been added later and approved by FIA (FISA). The A series Mantas homologation papers show the car with a cross flow head 8V that i have never ever seen. That does not indicate that all A series look like that, it is just indicating that this mod is allowed by FIA !

Now, let´s be honest shall we? I don´t know for sure what those wents are for, i assumed that having them placed above the exhaust, and above the intake it would give the car some fresh and much needed cool air to the engine room. BUT if as you say these turrets are in the FIA papers, this could also indicate that Opel actually knew that some would mount theese and made the intakes to accomodate this mod. But that is most unlikely. Why make them as intakes, if all that was needed was a small bump ? Doesnt make sense.

Anyway, i am out of this discussion before things get out of hand, the i400 never rolled out of the factory with those turrets, that is a fact.

Share this post


Link to post
Share on other sites

Maybe the vents were made for both air flow and raised turrets in mind.....

Would a standard steel 400 hood close with the raised turrets in place ????

Share this post


Link to post
Share on other sites

Cheers Brian..at least you get it.

I think you are missing the point my friend, the fact that the road cars and some of the tarmac spec cars did not use the extended turrets is totally irrelevant, the raises in the bonnet were homologated specificaly for the turret clearence. I`ve been rallying the 400 for more years than I care to remember and have had the pleasure to deal with a lot of the guys who were originaly involved with the cars homologation and subsequent development, hence the spec of my current rally car.

Sorry.

Edited by spewy555

Share this post


Link to post
Share on other sites

That´s amazing, I bow my head, and accept i was wrong then. smile.gif

I have never seen those turrets before, first i figured they where home made or something. We have no genuine 400´s racing here, and the replicas that do race (hillclimb, rally and track) doesnt have them.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×