Jump to content


  • Content count

  • Joined

  • Last visited

  • Days Won


grii_35 last won the day on May 24

grii_35 had the most liked content!

Community Reputation

5 Neutral

About grii_35

  • Rank

Profile Information

  • Location
  • Name
  1. Hi, as you will understand from the title, this was a complete adventure for me. Photos of all stages are available but it will take some time to edit and add them. But in general I believe these photos will give you an idea. I did all the work myself except the car bodywork and paint. Basically if I need to summarize the constructions, here are some of them; Rollcage with ST52 STEEL DRAWING ( I had to get a welding machine to do it ) Stainless steel gasoline tank (40 liters) Spool differential (4140 material with heat treatment) Electric water pump (I have been struggling to get the size of the aluminum flange required for installation ) Acrylic rear wing windows Fiberglass trunk lid and bonnet Regeneration of all bushes to 90 shore PE Making new adjustment shims to give a castor angle Giving the camber angle by cutting and welding the front lower swings Conversion from carburetor to injection New aluminum fuel rail for conversion of original injectors to EV6 Megasquirt ECU ( manufactured by myself ) Adapt the timing gear to the original crankshaft Electrical installation renewal (2 times and I think it will be 3 with this going ) These are the things that come to mind for now. I hope it will be clearer when I edit and add all pictures. https://goo.gl/photos/jCS9WqQ9AYWxxoak8 https://goo.gl/photos/xKeke1KegzVr7ooj9 https://goo.gl/photos/p7MSJMRbP8W1uzfR7 https://goo.gl/photos/NNerHt8BaHQSH2XMA https://goo.gl/photos/Gyc49xyrCYXt92wL9 https://goo.gl/photos/jtwzTfYcKeJ2KcHx5 https://goo.gl/photos/j3HC9iGKoy45Mow58 https://goo.gl/photos/7e93qW8BHFVRUdVL7 https://goo.gl/photos/iTjeXGY9JJKi82787 https://goo.gl/photos/pYnDBDswTvHt6S1w5 https://goo.gl/photos/rAixTLKqwdB7Hfcj7 https://goo.gl/photos/ZCK37yeKCkYbjazJA https://goo.gl/photos/Ye45eewvjCXQgkMz9 https://goo.gl/photos/ySYGNbbkWZTz32bJ6 https://goo.gl/photos/HgTV7UCmuiZYcQDg8 https://goo.gl/photos/sdco9mThVoEy6n796 https://goo.gl/photos/7vmbtP9cNZj22k469 https://goo.gl/photos/NRNQc6CV9iARa9VN8 https://goo.gl/photos/g9uTkp8yYW4ijxav6
  2. Greet you all. Everyone who is in the present from 2008 starts the "manta" adventure that I want to sell but I can not give up. I do not know what I can say here but I did everything except paint After a while, this hobby came to me as a disease. Now, instead of just dealing with all the parts I dismantled at the same time as I started to draw in the CAD environment. ( On the link you can see the 3D model of a few small pieces I made about manta - https://grabcad.com/harun.arik-2/projects ) I hope we can make better exchanges with you here. **Sorry for my bad English