Manta B Cc '79 By Messerschmitt

[Messerschmitt]

19.02.2012

Вот она, чиÑтаÑ, ÑÐ²ÐµÑ‚Ð»Ð°Ñ Ð»Ñбофф, ÑвалившаÑÑÑ ÐºÐ°Ðº Ñнег на голову. Ðе думал,не планировал. ЧиÑто Ñлучайно напоролÑÑ Ð¸ уже не Ñмог не купить )
Вот первые фоты на второй день по приезду домой.

Here it is, clean, bright LOVE had fallen out of the blue. Thought not planned. Purely by chance stumbled and was not able to not buy)

Here are the first photo on the second day on arrival home.

 

 

По капотом 1.9 ЕТИХ...тоеÑÑ‚ÑŒ ЦИХ  ÐšÐ¾Ñ€Ð¾Ð±ÐºÐ° 4-Ñ… Ñтупка.
Двигатель работает Ровно  Ð½Ð¸ коробка ни моÑÑ‚ не гудють.

 

Under the cowl is 1.9 CIH gearbox have 4 speed, engine works fine, gearbox and the axel do not abuzz

Edited February 26, 2015 by Messerschmitt

[mantaray]

cool

[Messerschmitt]

Продолжение Ñледует....

To be continued ...  )))

[Messerschmitt]

26.02.2012

 

Как Ñ ÑƒÐ¶Ðµ пиÑал,мне в нагрузку к Манте доÑталоÑÑŒ много полезных зап.чаÑтей. Одна из них - GMовÑкий бампер Ñ Ð¼Ð°ÑˆÐ¸Ð½ поÑледних годов выпуÑка. ДоÑталÑÑ Ð¾Ð½ мне в пакете,причем реально в ПÐКЕТЕ ) типа "Ñобери Ñам" (у предыдущего хазÑина,при транÑпортировании авто на лавете, бампер упал и разлетелÑÑ Ð² щепки) Завез обломки к "Ñпецу" он отказалÑÑ Ð·Ð° него братьÑÑ... И тут Ñ Ð²Ñпомнил что у Ñамого то руки не из попы     , вчера вечером взÑл в руки паÑльник и Ñел лÑпить.... и ÑÐµÐ³Ð¾Ð´Ð½Ñ Ð»Ñпил... вобщем вот вчерашние фото. СегоднÑ, думаю, доделаю и еще фот добавлю  

 

 

 

As I wrote, my load to Manta got a lot of useful spare parts. One of them - GM bumper cars last years of release.I got it in the bag and really in the package)such as "Do It Yourself" (the previous owner, transport cars on lavete, bumper fell and shattered into pieces) brought the wreckage to specialist but he refused to take him And then I remembered that my hands are not grow up from ass))) last night picked up a soldering iron, and sat down to sculpt....and today also sculpt...

in general that's yesterday's photo. Today, I think, and completed yet another add photo

Edited February 26, 2015 by Messerschmitt

[Messerschmitt]

please tell me,how to order photos ? )))

[MANTAMAN]

 Pryvit Vano,

 

 Ð¤Ð¾Ñ‚ографії, Ñкі ви виклали вÑе гаразд

 The pictures you have posted are OK

 

 ÐŸÑ€Ð¾Ñто розміÑтити Ñ—Ñ… у тому ж порÑдку, Ñк вони у Ð²Ð°Ñ Ñ” на інший веб-Ñайт

 Just post them in the same order as you have them on the other website

 

 ( ПроÑто розміÑÑ‚Ñ–Ñ‚Ñ– Ñ—Ñ… у тому ж порÑдку, Ñк Ñмороду у Ð²Ð°Ñ Ñ” на Інший веб-Ñайт )

 ( translated using google, which can be too literal at times )

[Messerschmitt]

ДÑкую ще раз) Так в тому то Ñ– питаннÑ, Ñк Ñ—Ñ… виправити за порÑдком? Вчора в мене вже закінчувавÑÑ Ð·Ð°Ñ€Ñд на ноутбук тому вÑтиг завантажити лише декілька фото з бампером але потім взÑв зарÑдний приÑтрій Ñ– виправив повідомленнÑ, добавивши ще декілька фото... тепер вони в початку повідомленнÑ... чи можливо Ñ—Ñ… ÑкоÑÑŒ переміÑтити до інших фото, вниз? ДивлюÑÑŒ можливіÑÑ‚ÑŒ корегувати Ñвої поÑти Ñ Ð²Ð¶Ðµ не маю...

 

Thank you again) So that's the question and how to fix them in the order? Yesterday I already ended charge on the laptop so had to retrieve only a few photos from the bumper but then took charger and corrected the message by adding a few more photos ... they are now in the beginning of the message ... is it possible to somehow move them to other photos, Down ? I looked opportunity to adjust their positions I have no ...

( translated using google,and my poor knowledge))) which can be too literal at times )

[Messerschmitt]

13,03,2012

 

Ð¡ÐµÐ³Ð¾Ð´Ð½Ñ ÐºÑƒÐ¿Ð¸Ð» обновочку на Манточку. СпаÑибо одноклубнику из РовенÑкого авто клуба!

 

Today I bought candy on Manta. Thanks to comrade from Rivne auto club!

 

 

Edited February 27, 2015 by Messerschmitt

[Messerschmitt]

14.04.2012

 

 

Ðекоторое Ð²Ñ€ÐµÐ¼Ñ Ð±Ñ‹Ð» за бугром - небыло времени заниматьÑÑ ÐœÐ°Ð½Ñ‚Ð°Ð·Ð°Ð²Ñ€Ð¸ÐºÐ¾Ð¼) Ðо, тем не менее, на ÑегоднÑшний день переÑыпал задние тормоза и таки добралÑÑ Ð´Ð¾ Ñтупиц переходников и ДИЦЦКОФФ.
Руки чеÑалиÑÑŒ побыÑтрее напÑлить шлапачки, потому и прикручены на два Ñ Ð¿Ð¾Ð»Ð¾Ð²Ð¸Ð½Ð¾Ð¹ болта) но пока поÑтоÑÑ‚ÑŒ и так Ñможет)))

 

 

Some time was over the hill(abroad))) - there was no time to engage with Mantazavrikom) But, nevertheless, today intersperse the rear brakes and still made it to the hubs and adapters of WHEELS.

Itching to get on  new wheels. Thats why fixed only with two and a half bolts) but still be able to stand up and so)))

 

( translated using google,and my poor knowledge))) which can be too literal at times )

 

 

 

 

[Messerschmitt]

05.05.2012

 

С тормозами проблема ( под замену .
Заглушил зад к едрени фени и Ñделал пробный выезд !!!
Ð¡ÐµÐ³Ð¾Ð´Ð½Ñ ÐœÐ°Ð½Ñ‚Ð¾Ñ‡ÐºÐ° преодолела Ñвою первую "Ñоточку", на Ñпидометре две...еÑÑ‚ÑŒ к чему ÑтремитьÑÑ )))

 

Have problem with brakes (     needs full replacement.

Threw rear brakes to hell  and did test the vehicle !!!

Today Mantochka overcame his first "100" on the speedometer two ... there is something to strive for)))

 

 

 

 

 

ПоÑле покупки множеÑтва новеньких ништÑчков и кузовщины (пороги,арки)
23.06. Манта СВОИМ ХОДОМ отправилаÑÑŒ в Бердичев на тотальную поварку-покраÑку-перешив Ñалона.

 

After buying brand new multitude "candys" and body parts (sills, arches)

23.06. Manta on her wheels went  in Berdichev-city in total body repair and painting.

Edited February 27, 2015 by Messerschmitt

[spiney_norman]

Awesome wheels

[Messerschmitt]

27,08,2012

 

 

Машина вÑе еще в Бердичеве, практичеÑки полноÑтью поварена . Работы оказалоÑÑŒ на порÑдок больше чем Ñ Ñ€Ð°ÑÑчитывал,но "художеÑÑ‚Ð²ÐµÐ½Ð½Ð°Ñ Ð»ÐµÐ¿ÐºÐ°" уже позади.

Собираю в кучу ништÑчки,готовлюÑÑŒ к покраÑке. Ð’ планах огненно краÑный цвет и Ð±ÐµÐ»Ð°Ñ ÐºÑ€Ñ‹ÑˆÐ°. Ð’ Бердичеве же перешыв Ñалона в кожу(Ñкорее вÑего молочного цвета)

Ðу а Ð´Ð»Ñ Ð·Ð°Ñ‚Ñ€Ð°Ð²Ð¾Ñ‡ÐºÐ¸ один из ништÑчков ) :

 

 

The machine is still in Berdichev, almost completely done (about body)

Work was on the order of magnitude larger than I expected, but "artistic modeling" is over.

Collect a bunch of pleasantness, getting ready for painting. The plans of fiery red and white roof. In Berdichev also alter the cabin into the skin (most likely milky colour)

well and for tension here the photo of one of the pleasantness:

 

 

[Messerschmitt]

27,09,2012

 

 

 

Вчера приехал из Бердичева, колдовал над машиной, привез пару фоток :

Манто-монÑÑ‚Ñ€ )))

 

Yesterday came from Berdichev, conjured over the machine, brought a couple of pictures:

 

Manta-Monster )))

 

[Messerschmitt]

28.09.2012

 

.....та Ñто проÑто обман Ð·Ñ€ÐµÐ½Ð¸Ñ )))

на Ñамом деле проÑто выкатил переднюю подвеÑку. Буду перебирать и лонжероны варить.
Ðу и куÑочек левой арочки )))

 

...... that is just an optical illusion)))

actually just rolled out the front suspension. I will clean and repair  also will repair the spars 

photo of the left wheel arch)))

 

 

 

 

[Messerschmitt]

5.11.2012 был в Бердичеве.
С теÑтем колдуем над машиной)
Пара фоток.

 

11.05.2012 was in Berdichev.

conjure with father in law on the machine )

A couple of photo.

 

 

Одна из оÑтавшыхÑÑ Ñ‚Ñ‹Ñ€Ð°Ðº:

The last one hole :

 

 

 

Ðовый порожек :

New body parts:

 

 

 

 

Поварен пол :

floor repaired:

 

 

 

Заднюю дверь, под резинкой Ñтекла погрызли крыÑÑ‹-транÑформеры (по кругу) :

Back door under the rubber band glass was nibbled by rat - transformers (in a circle): 

 

 

 

....и мы Ñ теÑтем Ð¿Ñ€Ð¾Ñ‚ив них воюем):

Ñначала делаем разрез по дырам...

 

.... and we are fighting with them

first makes an incision on the holes ...

 

 

затем вырезаем вот такую плаÑтину :

then cut just such a plate:

 

 

пробиваем две дырдочки(потом в них проденем проволоку) :

make the two holes (then they are threaded wire):

 

 

и загибаем:

and fold:

 

 

 

затем, ÑобÑно , продеваем проволоку и акуратно проталкиваем в прорез , затем за проволку подтÑгиваем в угол и привариваем :

then fills the wire and gently pushed into the slot, and then for the wire tightens into a corner and welds:

 

 

даёшь ÑплошнÑк! ))) :

welding :

 

 

и шлифовка :

and grind :

 

 

... и так по кругу вÑÑŽ лÑду   

... And so the circle whole door

 

Edited February 27, 2015 by Messerschmitt

[Messerschmitt]

before :

 

 

After

 

 

 

general form:

 

[Messerschmitt]

16,11,2012

 

Купил на Манточку ÑалонЧег )))

Bought at Mantachku seats from Volvo C70 .Skin)))

 

 

[Messerschmitt]

12.08.2012

 

ВзÑлÑÑ Ð·Ð° поÑледний Ñтап Ñварочных работ - передние лонжероны.

И ка бы робота Ñама не проблема а вот зап.чаÑти.....

Ðа Ибее покупать Клоккерхольм не дорого(отноÑительно) но доÑтавка и времÑ...кароч не Ð´Ð»Ñ Ð¼ÐµÐ½Ñ Ð²Ñе Ñто...мы легких путей не ищем)))

Ðашел в нете(ÑпаÑибо огромное Glukk-у ) трафареты лонжеронов, раÑпечатал...

 

Took the last step of welding - the front spars.

And as if the robot itself is not a problem but Spareparts .....

On E-bay Klokkerholm buy not expensive (relatively) but delivery and time ... in general, not for me all this ... we are not looking for the easy way)))

Found in the net (thanks to Glukk) stencils spars, printed ...

 

 

Кароч Ñколько в Ровно кантор что занимаютÑÑ Ð¾Ñ‚Ñ€ÐµÐ·Ð°Ñ‚ÑŒ-выгнуть , Ñтолько получал отказов, хоть бери и Ñам режь и гни  
Ðо... нашлаÑÑŒ контора что за ÑимволичеÑких 450(!) гривен взÑлаÑÑŒ вырезать ето ÑчЕаÑтье на плазме,правда и мозг проипло две недели, но вот развертки лонжеронов!

but in Rivne firms that are engaged in cut-bend, as is denied, though, and take himself cut and bend

 

But ... was found that office for a nominal 450 (!)(56$) Hryvnia undertook to cut this happiness to the plasma, the truth and the brain SENSORED two weeks, but the sweep spar!

 

 

И таки Ñам их поÑгибал  
Завтра везу в Бердичев!!! )))

finally flexed their own

Tomorrow I'm taking in Berdichev !!! )))

 

 

[®evo03]

Excellent car, very rare model. Great choice of wheels, and very good skills on metal work. Making your own chassis leg is excellent. Personal skills always is better than wasting money.

Q? How do you fit wheels that have five studs to manta, that is 4 nuts

Keep up the excellent work, good luck with project.

more photos please.

Edited February 28, 2015 by brady

[Messerschmitt]

Excellent car, very rare model. Great choice of wheels, and very good skills on metal work. Making your own chassis leg is excellent. Personal skills always is better than wasting money.

Q? How do you fit wheels that have five studs to manta, that is 4 nuts

Keep up the excellent work, good luck with project.

more photos please.

Thank you) I am self-taught master.

As for the four studs - more on that later.

Today the car is almost ready

[Messerschmitt]

a long time did not write anything

 

now the car looks like

 

 

 

a long time did not write anything

 

now the car looks like

 

 

 

Project images are available to Club Members Only, Click to become an OMOC Member.

[®evo03]

More pics please..

Great choice of wheels, they look 100%, how a manta should leave factory

What is your engine? Your colour choice is great, Like your style bro!

Edited November 10, 2015 by brady

[Messerschmitt]

Ок, I"ll add some more later)

The wheels is RH Mesh R16 ( I was collecting them over two years) 

Later i"ll show how they were instaled ( 5x120 to 4x100)

Now it is 19S, but i"ll put there 2.4 16v ... may be some charger ))))

After two years outdoor the colour is not so greate as it was(the paint was not good), so i decided to paint it once again.

 

so

this is my idea on a paper (about 5x120)

Project images are available to Club Members Only, Click to become an OMOC Member.

Project images are available to Club Members Only, Click to become an OMOC Member.

 

and here they are in metal :

Project images are available to Club Members Only, Click to become an OMOC Member.

 

Project images are available to Club Members Only, Click to become an OMOC Member.

 

Project images are available to Club Members Only, Click to become an OMOC Member.

 

Project images are available to Club Members Only, Click to become an OMOC Member.

 

Project images are available to Club Members Only, Click to become an OMOC Member.

here is the larger view:

http://piccy.info/view3/4158701/eece5178791b92f5703366dd870b4d39/

http://piccy.info/view3/4158699/cff45459370cbe46cb21ce86b99b0086/

http://piccy.info/view3/4164236/18a77ef0a0d932ed10dd65276bbb6ca1/

http://piccy.info/view3/4164240/c5eadebf0c4522503ae9dfb31043fe00/

 

to be continued)

Edited November 9, 2015 by Messerschmitt
add foto

[®evo03]

Yes that is good idea...., i think, is it aluminium?, how is it joined to existing metal hub.

Need more photos of car, are wheels from bmw?

 

[Messerschmitt]

Yes that is good idea...., i think, is it aluminium?, how is it joined to existing metal hub.

Need more photos of car, are wheels from bmw?

 

no it is not aluminium, it is steel 45 (in Germani it is steel Ck45 and C45 in France)

and it was instaled via a press fit (sorry im using google translator)