Mantacol Posted October 31, 2014 Share Posted October 31, 2014 Hi all does anyone have a pair of wheel spacers and bolts knocking about spare, as my front wheels are catching and i need to fit some spacers to my 400R . Or does anyone know of or used anyone who supplies them not too expensive {i know you get what you pay for lol} With thanks Link to comment Share on other sites More sharing options...
HutchRoslin Posted October 31, 2014 Share Posted October 31, 2014 I got mine from superforma, excellent quality spacers but you'll pay. Hubcentric spacers that bolt to the hub and the wheels bolts to the spacer..... and no, good spacers don't ruin wheel bearings like some folk say 1 Link to comment Share on other sites More sharing options...
mantaray Posted October 31, 2014 Share Posted October 31, 2014 Got a set I think, I'll take a pic and let you see them. 1 Link to comment Share on other sites More sharing options...
Kevin Abbott Posted November 1, 2014 Share Posted November 1, 2014 Look at your PCD, compare the PCD across the range and have a look on eBay for cheaper cars parts. I used Mitsubishi colt on the Mancona IIRC and got a hub centric set of 4 off eBay for about £50 2 Link to comment Share on other sites More sharing options...
toj28 Posted November 7, 2014 Share Posted November 7, 2014 Anyone got a link for these as i need the same to fit m5 bbs split rims to my manta ive seen some in the states but not the uk Link to comment Share on other sites More sharing options...
scottdi90 Posted November 7, 2014 Share Posted November 7, 2014 Assuming your pcd is 4x100, I have a set of decent hub-centric spacers. they are off a Mx5 so not sure about the centre size, I can measure if you like. They bolt to the hubs, and then have studs for the wheels. approx 45-50mm so might be a bit excessive. Link to comment Share on other sites More sharing options...
toj28 Posted November 12, 2014 Share Posted November 12, 2014 I need 4x100 4 stud to 5x12 0 m5 bmw fitment 20 25mm thick Link to comment Share on other sites More sharing options...
Kevin Abbott Posted November 19, 2014 Share Posted November 19, 2014 (edited) I need 4x100 4 stud to 5x12 0 m5 bmw fitment 20 25mm thick What you want then are PCD adaptors. I bought some 5x120 ali hubs from a member on here who makes them ( top job too ) and a machine shop can make the rears. Or buy a set of 4x100 to 5x120 adaptors, sure I've seen corsas and stuff using BM wheels and they won't have paid a fortune or they will be worth more than their car Edited November 19, 2014 by Kevin Abbott Link to comment Share on other sites More sharing options...
Recommended Posts