Jump to content

85 Gte Coupe With 3.5 Rover V8 With Mods (Unfinished Project)


paul691
 Share

Recommended Posts

Hi

 

I've decided to sell my V8 project car due to lack of free time to get it finished. It is an unfinished project, but theres not a huge amount to finish. It was my intention to us it as a fun track day car, but I doubt I'll ever get it finished due to work commitments. No MOT and its SORN. I'm not too sure about the mileage, I'd have to see what the last MOT cert says as I dont think the the clocks are the originals. The car used to have a (rotten) sunroof, this has been removed and plated with aluminium sheet. As it was going to be a track day car I wasnt bothered about appearance. Chassis is pretty solid!

 

A little about the car:

 

I bought it locally about 6 years ago with the v8 already fitted. A lot of welding work had been done including a new 2 slot front end and a widened transmission tunnel. The engine had an autobox and was mounted a little too far backwards and touched the bulkhead. I decided to remove the engine in order to remount it.

 

I rebuilt the engine after finding damage on the pistons. The engine has had:

 

New pistons (all)

Crank regrind and balance

Uprated push rods

Valves reseated

All new gaskets

Modified sump (big wing)

 

I refitted the engine with an LT77 5 speed manual box with a shortened gear leaver remote. It has a modified cable operated clutch (still needs final adjustment). I had an adapter made to fit the Rover propshaft to the Manta's. It has a 4 barrel carb fitted with Edelbrock inlet manifold (needs tuning). Also Edelbrock chrome rocker covers & air filter fitted. Engine still needs a little work, I've not started it in a while but I have been able to drive the car. Like I say, its a project car so some finishing off is required. 

 

Front and rear axles are poly bushed except rear ARB (Powerflex).

1800 rear axle

Bilstein shocks

Apex springs

Battery relocated to boot

New(ish) Bosch battery included

Copper brake & fuel lines routed inside the car

Quaife quick rack & 2x uprated UJ's (Flaming River)

Volvo 4 pot front brakes (hoses need finishing off)

Astra MK4 rear discs with Astra handbrake cable (brand new pads & handbrake cable)

Bolt in roll cage, welded in mounting points but needs final fitting to the bulkhead & rear arches

Custom exhaust with balance pipe & cherry bomb back boxes

Red top fuel pump & filter king

Polo blower motor

V8 rad fitted

Electric coolant fan & electronic controller

Remote brake servo

Quad headlights

17" Alloys (need new tyres)

Hydraulic handbrake with plumbed in pressure guages

Rear arches replaced but need body filler

Repairs carried out to right hand sill + inner

Has tubes welded into sills for sill stands (stands not included)

Various V8 spare will be included

 

The car is located in South Manchester but I'm currently working on the Isle of Wight but I do make regular trips home.

 

£1500

 

Would consider breaking for spares.......

 

 

20140714_090034891_iOS1.jpg

 

20140714_090047063_iOS.jpg

 

20140714_085954323_iOS1.jpg

 

20140714_085948133_iOS1.jpg

 

20140714_090002423_iOS1.jpg

 

20140714_085935274_iOS1.jpg

 

20140714_085806199_iOS1.jpg

 

20140714_085814267_iOS1.jpg

(TIM GAUGES NOT INCLUDED)

 

20140714_085821650_iOS1.jpg

 

20140714_085908062_iOS1.jpg

 

 

20140714_085856884_iOS1.jpg

 

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...