Jump to content

Window Winders


mcintbg
 Share

Recommended Posts

Yep, there is a small clip on the back of the winder that you need to pop off to release them.

Its basically the same setup as this image. use two small flat blade screw driver and you can leaver it out.

 

Andy

 

Image05.jpg

 

si5550.jpg

Link to comment
Share on other sites

You should find you have the black door panel, then a white/clear big plastic washer (like in the picture) and then the clip would sit in front on the plastic washer (it stops the clip chewing up the door panel)

So its a bit of a fiddle get the screw driver in behind the winder and before the flat plastic washer and with a bit of fiddling about you should be able to find the clip and prise it off. 

 

you should also find that the door panel will have a spring behind it pushing it out towards the winder so you might nee to hold this back to allow you to get the screw driver in behind the winder without scraping the panel.

 

Once you have done one you will see how its all setup.

 

I hope this makes it a bit more clear?

 

Andy

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...