Jump to content


Repair Panels For Manta B, Ascona B, Kadett C & Chevette


  • Please log in to reply
22 replies to this topic

#1 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 23 January 2012 - 10:03 AM

A quick note to say that in a couple of weeks time we will be receiving a stock of Klokkerholm repair panels for the above models.  We intend to keep a stock of the most popular panels, so they will be ready for immediate despatch to the UK, with no minimum order.

These are the parts we will initially be stocking:


5072582 – ascona 4 door right arch
5072581 – ascona 4 door left arch
5066001 – ascona 2 door right sill repair
5066002 – ascona 2 door left sill repair
5072011 – ascona 4 door right sill repair
5072012 – ascona 4 door left sill repair
5072680 – ascona lower rear panel
5072782 – ascona/manta right jacking point
5072781 – ascona/manta left jacking point
5072853 – ascona/manta spring cap/reinforcer
5072854 – ascona/manta spring cap/reinforcer
5072430 – ascona/manta bump stop carrier
5072261 – ascona headlamp surround
5072262 – ascona headlamp surround
5072290 – ascona/manta spare wheel well
5066592 – manta right arch repair
5066591 – manta left arch repair
5066220 – manta front valance
5066210 – manta front panel (4 slot, middle section)
5046401 – kadett c 'a' pillar repair
5046402 – kadett c 'a' pillar repair
5046680 – kadett c rear panel repair
5046592 – kadett c arch repair right
5046591 – kadett c arch repair left
5046122 – kadett c door repair right
5046121 – kadett c door repair left
5046382 – kadett c inner wing reinforcer
5046381 – kadett c inner wing reinforce
5046742 – kadett c floor repair
5046741 – kadett c floor repair
5046290 – kadett c wheel well
5046552 – kadett c inner arch repair
5046551 - kadett c inner arch repair

(Kadett C parts are for 2 door models and are the same for Chevette)

#2 Dubmaster77

Dubmaster77

    Rekord

  • OMOC Members
  • PipPip
  • 14 posts

Posted 29 January 2012 - 09:56 AM

How much for a manta b front valance?

#3 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 30 January 2012 - 07:44 AM

£54 plus £10 p&p

#4 Brown Job

Brown Job

    Senator

  • OMOC Members
  • PipPipPipPipPip
  • 653 posts
  • Gender:Not Telling
  • Location:Cheshire, United Kingdom

Posted 30 January 2012 - 06:04 PM

Hi,

Ascona B 4-door arches - assume these are for rear arch?  How much please?

BJ

Edited by Brown Job, 30 January 2012 - 06:04 PM.


#5 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 31 January 2012 - 08:14 AM

View PostBrown Job, on 30 January 2012 - 06:04 PM, said:

Hi,

Ascona B 4-door arches - assume these are for rear arch?  How much please?

BJ

£17.95 each plus £10 P&P.

PS: All panels will be arriving here today.  All will be listed on ebay this week as buy-it-now items but at an increased price to cover the ebay fees.

#6 stoo2000

stoo2000

    Technical Administrator

  • Administrators
  • PipPipPipPip
  • 484 posts
  • Location:Chester, UK

Posted 31 January 2012 - 10:13 AM

View PostRetro Power, on 31 January 2012 - 08:14 AM, said:

£17.95 each plus £10 P&P.

PS: All panels will be arriving here today.  All will be listed on ebay this week as buy-it-now items but at an increased price to cover the ebay fees.
I don't suppose you ordered any spare wheel well panels did you ? I see they're not on the list, but it's worth asking

#7 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 31 January 2012 - 11:45 AM

View Poststoo2000, on 31 January 2012 - 10:13 AM, said:

I don't suppose you ordered any spare wheel well panels did you ? I see they're not on the list, but it's worth asking

Yep (they are on the list) - £35.72 plus £10  P&P.

All panels have literally just arrived here :)

#8 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 31 January 2012 - 02:10 PM

View PostRetro Power, on 31 January 2012 - 08:14 AM, said:

£17.95 each plus £10 P&P.

PS: All panels will be arriving here today.  All will be listed on ebay this week as buy-it-now items but at an increased price to cover the ebay fees.

I actually only have one (Right) side as Klokkerholm are out of stock of the other.

#9 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 31 January 2012 - 05:06 PM

Panels now on ebay ;)

http://www.ebay.co.u...sid=p4340.l2562

10% discount if you buy direct - payment can still be via paypal or bank transfer/cheque.

#10 rayman

rayman

    Rekord

  • OMOC Members
  • PipPipPipPipPip
  • 665 posts
  • Gender:Male
  • Location:Helmshore

Posted 31 January 2012 - 05:25 PM

How much is n/s and o/f inner rear wheel arch including the postage for the Kadett c/chevette ...many thanks Mick

#11 Julian

Julian

    Diplomat

  • OMOC Members
  • PipPipPipPipPipPip
  • 1,243 posts
  • Gender:Male
  • Location:Kidwelly

Posted 31 January 2012 - 06:41 PM

Is the diameter of the hole in these jacking points the same as the OE?  I seem to think that it was mentioned, a while back that some of these Klokkerholm Jacking points where slightley smaller, and the rod on the OE Jack would not enter the hole.

#12 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 31 January 2012 - 06:48 PM

View Postrayman, on 31 January 2012 - 05:25 PM, said:

How much is n/s and o/f inner rear wheel arch including the postage for the Kadett c/chevette ...many thanks Mick

The non-ebay price is £33.59 each plus £10 P&P.

See ebay listing for pictures

View PostJulian, on 31 January 2012 - 06:41 PM, said:

Is the diameter of the hole in these jacking points the same as the OE?  I seem to think that it was mentioned, a while back that some of these Klokkerholm Jacking points where slightley smaller, and the rod on the OE Jack would not enter the hole.

Yes, the holes are a smaller diameter, so OE jack won't fit with mods ;)

#13 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 31 January 2012 - 08:19 PM

PS just to add, all the klockerholm jacking points have the same hole size (or at least all the ones I have seen) and they are all too small, and unfortunately nobody else makes jacking points with the correct size holes! I guess we could cut the tubes out and put bigger ones in but it would bump the price a bit!

#14 GTEPETE

GTEPETE

    Commodore

  • Moderators
  • PipPipPipPipPip
  • 556 posts
  • Gender:Male
  • Location:United Kingdom

Posted 31 January 2012 - 08:28 PM

Do they either do a complete 4 slot front grill panel or the sections over the headlights?????

#15 Julian

Julian

    Diplomat

  • OMOC Members
  • PipPipPipPipPipPip
  • 1,243 posts
  • Gender:Male
  • Location:Kidwelly

Posted 01 February 2012 - 12:33 PM

View PostRetro Power, on 31 January 2012 - 08:19 PM, said:

PS just to add, all the klockerholm jacking points have the same hole size (or at least all the ones I have seen) and they are all too small, and unfortunately nobody else makes jacking points with the correct size holes! I guess we could cut the tubes out and put bigger ones in but it would bump the price a bit!
When I fitted a couple a couple of years back, I reamed them out with that special tool kit that we used years ago ie, a  KINGPIN reamer!! as there is ample metal in that tube.are they still used today? I often wonder.

Edited by Julian, 01 February 2012 - 12:34 PM.


#16 Retro Power

Retro Power

    Kadett

  • OMOC Members
  • PipPipPipPipPip
  • 599 posts
  • Gender:Male
  • Location:Leicestershire

Posted 01 February 2012 - 12:50 PM

View PostGTEPETE, on 31 January 2012 - 08:28 PM, said:

Do they either do a complete 4 slot front grill panel or the sections over the headlights?????

I'm afraid not - we may have a good used one though - i'll have to have a rummage through the collection ;)

Would you be interested ?

Edited by Retro Power, 01 February 2012 - 12:50 PM.


#17 brianm

brianm

    Rekord

  • Users
  • PipPip
  • 94 posts
  • Gender:Male
  • Location:ayrshire

Posted 01 February 2012 - 07:01 PM

can you get floorpans for a manta b ???

#18 GTEPETE

GTEPETE

    Commodore

  • Moderators
  • PipPipPipPipPip
  • 556 posts
  • Gender:Male
  • Location:United Kingdom

Posted 01 February 2012 - 08:09 PM

No thanks, I will probably fit a complete front end...

#19 *energy*

*energy*

    Kapitan

  • Users
  • PipPipPip
  • 152 posts

Posted 01 February 2012 - 09:10 PM

alrighy bud...il have two ascona 4door rear arches please if you have any or will be getting any.happy to paypal ypu for them anytime.
Rab

#20 manta3000

manta3000

    Commodore

  • OMOC Members
  • PipPipPipPip
  • 254 posts
  • Gender:Male
  • Location:N.E.SCOTLAND

Posted 04 February 2012 - 08:55 PM

hi
meant 2 phone today
will take 1x left
1x right manta jacking points
p/p to
DD8 1PT
cheers colin




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users