25 replies to this topic

[SENNA1]

Hi guys!
Anyboby knows where i can find an exhaust/inlet manifold gasket for 2.2 S cylinder head?
Thanks in advance.

Edited by SENNA1, 16 January 2012 - 06:46 PM.

[lamchop77]

Senna

When i was looking the 2.2 was not listed in a lot of motor factors, try looking for a 2.4 gasket same port pattern.

Cheers

Chris

[Shug]

Should still be available from dealer. Thats where mine came from last year.

[SENNA1]

Shug, on 18 January 2012 - 01:54 PM, said:

Should still be available from dealer. Thats where mine came from last year.

Dealer in Cyprus has no spares on 'old' cars
Is it possible to order it from your dealer??

Edited by SENNA1, 18 January 2012 - 07:46 PM.

[SENNA1]

lamchop77, on 18 January 2012 - 12:47 PM, said:

Senna

When i was looking the 2.2 was not listed in a lot of motor factors, try looking for a 2.4 gasket same port pattern.

Cheers

Chris

Hi Chris ,
just checked on e-bay but nothing....i have to keep searging.........
Many thanks!

[Shug]

OCP might have them too.
http://opel-classicp...ore=b2c_deutsch
Dont know the part number. Andy C sorted it for me.

[MANTAMAN]

question for someone on here with greater knowledge -i am told the six cylinder Cam-in-Head engine had the raised intake ports like the 2.2 head, would it be possible to buy a six cylinder gasket and chop off the last two cylinders of it?

[lamchop77]

Payen(federal Mogul now i think) still did them got 2 last year. I'll try n check this weekend if they are still available at my local motor factor. I have been told that there is a special mastis sealant specially formulated for inlet/exhaust manifolds, might be worth looking into that.

[SENNA1]

Shug, on 18 January 2012 - 09:27 PM, said:

OCP might have them too.
http://opel-classicp...ore=b2c_deutsch
Dont know the part number. Andy C sorted it for me.

Just checked....impossible to find without p/n...

[SENNA1]

The only think that i have to do for the moment is to put the old gasket back(not in a good condition)& keep checking for a new one

[Exclusive Opel]

You can buy the metal gasket material in sheet form so you can make one yourself. Just use the old one as a template.

[SENNA1]

Exclusive Opel, on 21 January 2012 - 05:00 PM, said:

You can buy the metal gasket material in sheet form so you can make one yourself. Just use the old one as a template.

Buy it from where?Can i order it from the internet?(remember:i live in Cyprus -i cannot find anything here)

[Exclusive Opel]

Have a look here:

http://www.ebay.co.u...=item35b8d34ef8

Never tried it myself but got to be worth a go.

I do have a gasket if you need a scan/drawing of it for a template.

[SENNA1]

Exclusive Opel, on 23 January 2012 - 08:27 PM, said:

Have a look here:

http://www.ebay.co.u...=item35b8d34ef8

Never tried it myself but got to be worth a go.

I do have a gasket if you need a scan/drawing of it for a template.

I'll have it in mind if i don't find the exact gasket!
Thanks

[lamchop77]

Senna

Check Elring gaskets, omega A or Frontera part no for gasket is 893.196

HTH

Chris

[SENNA1]

Checked the Elring site but seems to be incomplete

[SENNA1]

At last! Just got the gasket from Germany via a friend!
Thanks to all!

[monzta]

You guys really don´t know where to look for the good parts

http://www.krause-re...pe=1&referid=88

[SENNA1]

monzta, on 08 February 2012 - 10:08 PM, said:

You guys really don´t know where to look for the good parts

http://www.krause-re...pe=1&referid=88

Well,where have you been so long mate??

[monzta]

Frozen, we have bloody -24 degree c here in Denmark