im in need of a pair of sub frame mounting bolts for my gte after having to cut the rusty seized old ones out - does anyone know if these are avaiable new ?? failing that a second hand set in good condition ???
thanks in advance. Dan
1
Wanted Sub Frame Mounting Bolts For My Gte
Started by
e966kfl
, Jan 07 2012 02:51 PM
10 replies to this topic
#1
e966kfl
-
- OMOC Members
-
- 79 posts
Rekord
- Gender:Male
- Location:Herts (berko)
Posted 07 January 2012 - 02:51 PM
#2
399Road
-
- OMOC Members
-
- 382 posts
Commodore
- Gender:Male
- Location:Derbyshire
Posted 08 January 2012 - 10:53 PM
Dan,
Dr Manta, in Germany does these bolts for about £15 each. Alternatively you can just put normal bolts through from a nuts and bolts supplier. Make sure you use Nyloc nuts on the new bolts though. Don't be tempted to use Stainless bolts as they are not very strong and could snap easily......Luke.
Dr Manta, in Germany does these bolts for about £15 each. Alternatively you can just put normal bolts through from a nuts and bolts supplier. Make sure you use Nyloc nuts on the new bolts though. Don't be tempted to use Stainless bolts as they are not very strong and could snap easily......Luke.
#3
mantasrme
-
- OMOC Members
-
- 1,179 posts
Diplomat
- Gender:Male
- Location:Harrogate, North Yorkshire
Posted 08 January 2012 - 11:19 PM
I use high tensile 12.9 M14 bolts sourced from e-bay for about £4 a pair along with nyloc nuts
#4
opel2000
-
- Users
-
- 3,184 posts
Manta Guru
- Gender:Male
- Location:Leicester uk
Posted 09 January 2012 - 07:35 PM
mantasrme, on 08 January 2012 - 11:19 PM, said:
I use high tensile 12.9 M14 bolts sourced from e-bay for about £4 a pair along with nyloc nuts
#5
e966kfl
-
- OMOC Members
-
- 79 posts
Rekord
- Gender:Male
- Location:Herts (berko)
Posted 16 January 2012 - 09:13 PM
excellent thanks guys for the advise .......next stop ebay me thinks 
#6
drew
-
- OMOC Members
-
- 168 posts
Kapitan
- Gender:Male
- Location:United Kingdom
Posted 18 January 2012 - 07:51 AM
hi there i have a pair of used ones but i have had them re zinc plated so they are like new ones i also have the washers and nuts for them,i am looking for £20 plus £2.50 p&p give me a shout if you are interested. contact 07977950044. cheers drew
#7
e966kfl
-
- OMOC Members
-
- 79 posts
Rekord
- Gender:Male
- Location:Herts (berko)
Posted 18 January 2012 - 06:39 PM
drew, on 18 January 2012 - 07:51 AM, said:
hi there i have a pair of used ones but i have had them re zinc plated so they are like new ones i also have the washers and nuts for them,i am looking for £20 plus £2.50 p&p give me a shout if you are interested. contact 07977950044. cheers drew
twenty quid !!! are they gold plated too??? call me tight but thats a bit steep aint it ?
#8
mantadoc
-
- Moderators
-
- 3,564 posts
Manta Guru
- Location:Third sphere from the Sun, Northern Hemisphere, East of Ireland, West of France, South of Scotland and more Northerly than the highest bit of wales.
Posted 18 January 2012 - 08:38 PM
Nyloc 1" approx from downpipes.................
#9
drew
-
- OMOC Members
-
- 168 posts
Kapitan
- Gender:Male
- Location:United Kingdom
Posted 18 January 2012 - 09:38 PM
funny i have sold ten pairs of these and noboby has complained about the price, and they are at least the original ones 
#10
mantasrme
-
- OMOC Members
-
- 1,179 posts
Diplomat
- Gender:Male
- Location:Harrogate, North Yorkshire
Posted 20 January 2012 - 08:26 PM
mantadoc, on 18 January 2012 - 08:38 PM, said:
Nyloc 1" approx from downpipes.................
#11
Retro Power
-
- OMOC Members
-
- 599 posts
Kadett
- Gender:Male
- Location:Leicestershire
Posted 27 January 2012 - 06:55 PM
....... But even if it was it would be fine! Done it plenty of times and never had one come loose.
Ps 20 quid for a plated bolt and nut and washer set for these bolts sounds fair enough to me! Drew is running a business and getting them plated involves running around the place, it's not like he's just picking them up at asda!
Ps 20 quid for a plated bolt and nut and washer set for these bolts sounds fair enough to me! Drew is running a business and getting them plated involves running around the place, it's not like he's just picking them up at asda!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
