146 replies to this topic

[berni]

how much are parachutes these days!!. lol

[johno]

Been buying tight 90 bends from jetex not cheap but def must to squeeze it all in!.should sound sweet blowing through 3" into 4" pipework?   ya get free parachutes with each turbo you order....   

[johno]

picked up the new phenum today have a t5 gearbox waiting in the wings im sure it wont be long before it needs bolting in?!! recon i need to re-think the brakes as well...

[johno]

[Sutty2006]

Thats one hell of a monster!!! You'll need a sticker for the back window "boostin' fer Jesus!"

Awesome!

[johno]

its gunna be a laff on the road..   i,ll prob crap myself!!..

[johno]

[johno]

Having these off my good friend adrian, there still bolted to his williams clio at the mo...dont think i,ll find anything else for the small price and the same bite as these!! pcd off clio very close to that of manta so thay fit, but theres 10mm diff re-offset off disc its seif but like every thing else it will need to be fetled..

[Retro Power]

Too late now but for bends I use stainless dairy bends (or "hygienic" pipe fittings as they're known) from Damstahl in Telford, around £5 for a 2" 90 deg bend in 316L stainless

[johno]

Was to cold to up on the roofs yesterday so i went to lockup knock,d this up instead..

[johno]

Dont think will have so many of those squeeky bum moments now!!

[Kevin Abbott]

Whoa! hugeness
Have you made the brackets to mount to the stub axle?

[johno]

slotted the stub axle into front face of alloy bell mark,d four holes that you use to bolt disc to the hub drilled holes, needed 35mm hex cup bolts if that makes sence? prob better with pics!

managed to spin engine over to get the oil flowing through turbos etc..waiting for alternator, gone for daihatsu charade compact unit then need sort firing order out and see if get some tunes out of her?!

[johno]

Had manta singing on all six pots today..(not sure about singing sounds more like rolling thunder man o man!!!!..)        

[johno]

n

    pedal box arrived today just needs a little fetling lol..and iv have some brakes..

[johno]

[johno]

^{after fear bit of fetling pedal box and brake pipes are finnished just need bleed them now! paid £10 sqid for throttle cable came off toyota van at scrapyard then made linkage works well..}

[gary6303]

very well done mate, coming on nicely and some very nice fabrication work going on aswell.

[johno]

cheers dude...  fired my flat roofing gun up heated some 4mm tourch on felt to inside of manta for sound deadening.. and started put carpets back in feels good to start putting inside back together!!



will have to stretch center consol out a little should turn out okay..

[johno]